Home > Cases & Stands > Monitor Stands
Sort By:
Page of 1
Genelec 8010-408 Stand Plate for 8010 Series Monitors (Black)

Genelec stand plates are designed for use together with the Iso-Pod that comes with all 8000 series monitors. The Iso-Pod allows you to tilt the monitor for optimal alignment. Simply mount the stand plate onto the 3/8" thread on the tube and ensure tight screw connection. Place the Iso-Pod over the four pins of the stand plate.

Price: £40.00 Inc VAT
Genelec 8010-408W Stand Plate for 8010 Series Monitors (White)

Genelec stand plates are designed for use together with the Iso-Pod that comes with all 8000 series monitors. The Iso-Pod allows you to tilt the monitor for optimal alignment. Simply mount the stand plate onto the 3/8" thread on the tube and ensure tight screw connection. Place the Iso-Pod over the four pins of the stand plate.

Price: £40.00 Inc VAT
Art CleanBox II Hum Eliminator

"Hum" in an audio system is often caused by loop effects which act like antennas. These loops can easily pick up a 60 Hz (or higher harmonics) hum transmitted by electrical wiring. Typically, these loops are connected via grounds, more commonly called "ground loops". The safest way to eliminate unwanted noise is with the CleanBOX II. Some examples of Ground Loops:

The power ground of a synthesizer, connected to the signal ground of the synth, into a mixer's ground, then into a mixer's power ground.

The signal ground of a send effect (reverb, delay) into a mixer, and the connecting power grounds of the mixer and the unit.

The power ground of a guitar amplifier, connected to a signal processor which has a second guitar amplifier on the other channel, and then the second guitar amp's power ground.

The CleanBOX II easily removes ground loops without any signal degradation.

Price: £43.99 Inc VAT
Genelec 8000-425B Telescopic Table Monitor Stand (Black)

Adjustable height table stand for 8010, 8020 and 8030 with a base plate that can be attached to a table or flat surface. Preferably used with stand plate and Iso-Pod for better monitor orientation (see picture below). The telescopic tube length (301 to 527 mm) is designed for optimum monitor positioning behind or above computer screens. Screws and fixing nuts for a 40 mm thick table are included.

Price: £48.00 Inc VAT
Genelec 8010-320B L-Shape Table Stand for 8010 Series Monitors (Black)

This stand lifts up the speaker from the table, providing less reflections from the nearby surface and eliminating the comb filtering effect. Also this accessory makes it easier to get the loudspeaker’s acoustical focus towards the listening position and keep the cables in place.

Price: £49.99 Inc VAT
Genelec 8010-320W L-Shape Table Stand for 8010 Series Monitors (White)

This stand lifts up the speaker from the table, providing less reflections from the nearby surface and eliminating the comb filtering effect. Also this accessory makes it easier to get the loudspeaker’s acoustical focus towards the listening position and keep the cables in place.

Price: £49.99 Inc VAT
Genelec 8000-422B Wall Bracket for 8000 Series Monitors (Black)

Wall mount bracket for 8010, 8020 and 8030. Available in black and white.

Price: £75.00 Inc VAT
Genelec 8000-422W Wall Bracket for 8000 Series Monitors (White)

Wall mount bracket for 8010, 8020 and 8030. Available in black and white.

Price: £75.00 Inc VAT
Genelec 8000-402B Wall Bracket for 8000 Series Monitors (Black)

Wall mounting bracket for 8000 series. Available in
black and white. 8X40 and 8X50 do not need the
included T-plate.

Price: £96.00 Inc VAT
Genelec 8000-402W Wall Bracket for 8000 Series Monitors (White)

Wall mounting bracket for 8000 series. Available in
black and white. 8X40 and 8X50 do not need the
included T-plate.

Price: £96.00 Inc VAT