Intellijel uFold II Eurorack Waveshaper Module
The µFold is a collaborated design with David G. Dixon.
This is the version II of the original µFold.
Fold control with a cv input and dedicated attenuator.
Thru-zero symmetry control with a bipolar cv input and dedicated attenuator.
Stages switch to select 2, 4 or 6 stages of folding.
Trimmer on back to set the maximum drive amount in order to limit the range of the timbre shaping to a more subtle amount if needed.
DCcoupled inputs so you can also feed cv to be folded.
Intellijel looked very closely at how some of the most loved timbre shaping circuits worked in classic synth modules; Not just in how they were implemented electronically but how they sounded and how efficient they were to get great sounds. it was important that their design was very versatile in range of timbres but still easy to use and with well thought out control ranges.
When combining the Dixie, μVCA, μFade and μFold you can achieve extremely complex palette of sounds with just a few modules!
LZX Industries Mapper Eurorack Video Utility Processor Module
Give your television vertigo with analogue color wheel rotation! Mapper is a complex utility module which translates Hue, Saturation and Brightness voltages into component YUV (Luma, R-Y, B-Y) and RGB (Red, Green, Blue) colorspaces. At its heart is an analogue, wideband polar-to-cartesian coordinates waveshaper with up to 720 degrees of linear rotation. Black and white (Luma) video sources can be fed into the Hue modulation input to achieve vivid thermographic vision colorizer effects, and that’s just Mapper’s most obvious use case.
Hue, Saturation & Brightness modulation inputs with dedicated gain controls.
Saturation & Brightness modulation attenuators have an inversion switch.
Hue input is selectable between 360 and 720 degrees of rotation at full scale.
Dedicated Hue, Saturation & Brightness offset controls.
Polar-to-cartesian waveshaper design transforms a linear input voltage (Hue) into Sine / Cosine complement outputs (U & V out.)
YUV-to-RGB colorspace converter.
Dave Smith Instruments DSM02 Character Module
Dave Smith strikes again with a new offering for modular synthesizer users — the DSM02 Character Module. It’s a sound designer’s tool kit of five unique digital effects for shaping, twisting, and mangling sound in subtle and not-so-subtle ways. These effects, Girth, Air, Decimate, Hack, and Drive form the Character section of DSI’s acclaimed Prophet 12 and Pro 2 synthesizers and contribute to their distinctive tone in a big way.
“Girth” provides low-frequency harmonic enhancement for adding weight and density.
“Air” provides high-frequency harmonic enhancement for adding definition and presence.
“Decimate” performs sample rate reduction for adding lo-fi grunge.
“Hack” is a bit crusher capable of trashing an otherwise clean signal nearly beyond recognition.
“Drive” adds overdrive and saturation, with warmth at one end of the knob and harmonic overload at the other.
Plug It and Play It
The DSM02 is a 14 HP Eurorack-format module with interconnections made using 3.5 mm phone jacks. Two independent audio inputs and two independent audio outputs with shared control allow mono or stereo operation. A 24-bit, 96 kHz resolution digital signal path provides uncompromising signal fidelity.
Inject Some Mojo into Your System
If you’re looking to take your modular system into new sonic territory, the DSM02 may be just the ticket. It’s a fast and affordable way to inject your system with some serious mojo from two of the world’s most in-demand synths.
1 CV In – Girth (3.5 mm jack) Range: 0 to 10V
1 CV In – Air (3.5 mm jack) Range: 0 to 10V
1 CV In – Decimate (3.5 mm jack) Range: 0 to 10V
1 CV In – Hack (3.5 mm jack) Range: 0 to 10V
1 CV In – Drive (3.5 mm jack) Range: 0 to 10V
2 Audio In (3.5 mm jack) +/-5V or 10V p-p
2 Audio Out (3.5 mm jack)
Internal power connector (ribbon cable included)
Power select: Local 5V or System 5V (jumper included)
Current draw at Local 5V: +12V @ 150mA, -12V @ 20mA
Current draw at System 5V: +12V @ 20mA, -12V @ 20mA, +5V @ 150mA
2.79″ W x 5.06″ H (70.8 mm x 128.5 mm)
Width: 14 HP
Depth (measured from back of panel with power cable installed): 1.18″ (30.1 mm)
Ribbon cable for power connection
Power jumper for selecting Local or System power
Erica Synths Pico Eurorack Logic A Module
Erica Pico A LOGIC module is our CERN Hadron Collider for CVs! It takes two incoming CVs and outputs momentary SUM and DIFFERENCE of both CVs, as well as follows curves MAXIMUM and MINIMUM values of both CVs. Try to patch audio signals into both inputs and get distinct ringmodulation and waveshaping effects!
2 CV/audio inputs
Simultaneous outputs of sum, difference, maximum and minimum
levels of both inputs
4 output signal control LEDs
With Pico Series we challenged ourselves – can we make ANY superior functionality synth module 3HP wide and affordable? Yes, we can.
TipTop Audio Fold Eurorack Wavefolder Module
The Fold Processor is a voltage controlled wave multiplier and sub-octave generator. The circuit is based on a classic diode design that adds odd harmonics by folding the incoming signal, followed by subdivided square waves.
The wave folder creates new waveforms from the standard sine, triangle, sawtooth and square waves, has a dedicated output jack and CV input with an attenuator making it very easy to create beautifully animated folding sounds. Adjustable voltage controlled Inject alters the bias point creating an even wider palette of sounds.
The subdivide generator squares the fold output generating 4 more sounds spaced one octave apart, each with its own gain knob and mixed to the Subdivide output jack. Mixing the four can create anything from discordant square wave swarms to sweet harmonic oscillator stacks, from a stable square version of the folded wave to freaky PLL like glitched slides.
Overall results can sound evil at times and sweet at others, a true multi-faced devil.
Size: 12HP –
Depth: 42mm –
Power: +12V 60ma / -12V 55ma