Home > Eurorack > Utility > Audio Input/Output
Sort By:
Page of 1
Audio Damage ADM09 ODIO Eurorack Module

Odio is a 2-in 2-out USB audio interface that runs at modular audio levels, designed primarily for use with iOS devices such as the iPad and iPhone. Easily integrate iPad effects and instruments in to your modular rig for live performance or sketchpad recording, or use a Microsoft Surface Pro or netbook and a simple host to use VST plug-in effects as inserts in your modular.
As a class-compliant USB audio device, it will work fine with most any computer running Windows, OS X, or Linux. Integrate a laptop in to your live rig, or use it as an output pair for Silent Way or Volta. Odio is an easy solution to computer, phone, and tablet integration, designed with the modular synthesizer environment in mind.

Price: £287.10 Inc VAT
Intellijel Audio Interface Eurorack Module (1U)

This module allows you to interface your Eurorack modular system to the pro balanced line level world (+4 dBu). You can send and return to rack mount/desktop FX units, patch to external line-level instruments like synths and drum machines, interface to a DAW, and much more.
Features:
2 x Balanced TRS 1/4″ to Eurorack modular level input paths
2 x Eurorack modular level signals to Balanced TRS 1/4″ output paths
4 x two-stage LED VU meter to monitor all inputs and outputs simultaneously
Uses high quality THATCorp balanced line drivers and receiver ICs.
Input path has up to 20 dB of gain which allows you to patch in low level consumer level signals and boost them. 0 dB = 10 Vpp (nominal Eurorack level)
Output path steps a nominal Eurorack level (10 Vpp) down to +4 dBu with up to +6 dB gain.
This module connects to the Audio I/O JACKS module via ribbon cable. The same ribbon cable can be used to connect to the rear-mounted audio jacks of the 7U performance cases.

Price: £119.00 Inc VAT
Intellijel Audio I/O Eurorack 1U Module (Jacks)

TRS jacks for the Audio I/O interface in 1U.
You need this module for the Audio I/O 1U
This module is not needed if you have the 7U performance case that comes with rear mounted audio i/o jacks.

Price: £22.00 Inc VAT
Intellijel Audio Interface II Eurorack Module

This module allows you to interface your Eurorack modular system to the pro balanced line level world (+4dBu). You can send and return to rack mount/desktop fx units, patch to external line level instruments like synths and drum machines, interface to a DAW and much more.
2 x Balanced TRS 1/4″ to Eurorack modular level input paths
2 x Eurorack modular level signals to Balanced TRS 1/4″ output paths
4 x six stage led VU meter to monitor all inputs and outputs simultaneously
Uses high quality THATCorp balanced line drivers and receiver ICs.
Input path has up to 20dB of gain which allows you to patch in low level consumer level signals and boost them. 0dB = 10Vpp (nominal Eurorack level)
Output path steps a nominal Eurorack level (10Vpp) down to +4dBu with up to +6dB gain.
Skiff friendly

Price: £259.00 Inc VAT
Intellijel Boombox Eurorack Loudspeaker Module

3″ aluminum cone driver
Efficient D Class 15W amp
Special bass boost extends the low end range
Sealed speaker enclosure filled with acousta-stuff polyfill
Clip led indicates input overload
This was designed as a fun option to plug into your system and jam somewhere free of cables for speakers. Quick way to test out ideas and also for feedback experiments with a mic.

Price: £129.00 Inc VAT
Intellijel Line Out Eurorack 1U Module

This module allows you to interface your Eurorack modular system to the pro balanced line level world (+4 dBu). You can send audio out to rack mount/desktop FX units, patch to external line-level instruments like synths and drum machines, interface to a DAW, and much more.
Features:
1 x Eurorack modular level signals to Balanced TRS 1/4″ output path
Uses a high quality THATCorp balanced line driver IC
Output path steps a nominal Eurorack level (10 Vpp) down to +4 dBu with up to +6 dB gain.

Price: £38.99 Inc VAT
Intellijel uJack Eurorack Headphone Monitor Module

headphone and stereo line out
A very handy module for directly monitoring your system with headphones and as a convenient line level output to connect to amplifiers or recording devices.
The headphone amp is low noise and capable of driving low impedance studio headphones.

Features:
Headphone amp capable of driving high impedance headphones via 1/4″ stereo Neutrik jack
L and R -10dBv unbalanced line level outputs on TRS 1/4″ Neutrik jacks
Switch for mono/stereo monitoring
Left input normalled to Right input
Individual level attenuators and global stereo headphone gain control
6pin header on back of module and ribbon cable for connecting directly to outputs of Azimuth II.

Price: £119.00 Inc VAT
Make Noise Rosie Output Interface Eurorack Module

Rosie is an output interfacing module with the added functionalities of FX Loop, Crossfader and Auto-Cue system. It is designed to facilitate live performance on the modular synthesizer by allowing the artist to preview and modify portions of a patch using the Auto-CUE system, while the audience is listening to a different portion of the patch as selected by the crossfader. Additionally it allows for Stereo processing of all sounds via the FX Loop. The Rosie is suitable for headphone monitoring of the modular system and interfacing the modular system to a recording environment. Internal Level Matching and Limiting w/ overload indication makes it easy to connect the modular system in the studio or on stage.

Features

Master Volume Control for the modular system
1/4" Stereo output connects easily with mixers, audio interfaces, amplifiers, headphones
Mini-jack output for use with headphones and more
Two Mono Inputs (Channel A and B) w/ LED indication of signal strength
Crossfader to select or blend between Channel A and B
Mono FX Send with Stereo or Mono Return and Return Level control
Auto-CUE allows for patch preview
Maximum artist controlled musical variation, minimum data input
Uses high quality Burr Brown line drivers
Pairs well with the Erbe-Verb

Price: £139.00 Inc VAT
Erica Synths Sequential Switch Eurorack Module

8-channel Sequential Switch

Erica Synths 8 channel SEQUENTIAL SWITCH is unique module that allows you to sequence up to eight sound sources in advanced ways or route one sound source sequentially to eight different sound modifiers – VCFs, waveshapers, VCAs, etc. It has unique control interface that allows you to pause, skip and merge steps, set sequence length, but what really sets it apart from other sequential switches is Gate output – when used with ADSR and VCA, you get really powerful sequencer with real time control over each sound source in the sequence. Use Sequential Switch with random clock source and you get a heart of insane random, self-generating patches!
NB! Input signal level for SS should not exceed 20Vptp (that is rare occasion in modular synths). Nothing bad will happen, but you will hear some unwanted signal on unused outputs.

Price: £115.00 Inc VAT
Sputnik Audio EF/Preamp Eurorack Module

High quality preamp for Mic or Line level sources to amplify their signal to the very high levels required for the Eurorack standard. There is also an Envelope Follower circuit which can generate a Control Voltage signal based on the Input Signal from the preamp (great for everything from short percussive envelopes to allowing a Filter to open and close when you talk or sing into a microphone).


The SPUTNIK ENVELOPE FOLLOWER/PREAMP is a dual function module that allows audio signals to be brought up to proper levels to be sonically manipulated by other Eurorack modules or to be converted into control voltage. The preamp section includes a balanced ¼” TRS cable input jack that can accept sound sources such as microphones, guitar pickups, keyboards, drum machines, etc. Three selectable gain modes are available via a switch with an additional gain knob to dial in the signal to the exact level you need. The envelope follower section of the module features an input jack for modular level signals and outputs for CV and pulses. Front panel knobs give you control over input sensitivity and CV envelope decay time.

ENVELOPE FOLLOWER

INPUT
Eurorack modular level audio input (10V p2p). If no input is present, the output of the preamp section is normalized to the envelop follower input.

PULSE OUTPUT
Outputs a 5V pulse when the CV level (after the Sensitivity attenuator) exceeds approximately 2.5V. Pulses may trigger envelopes, sequencers, or pluck a low pass gate.

CV OUTPUT
Outputs a CV value (between 0 to +10V) based on the amplitude of the audio input. Allows audio to control any number of CV parameters on Eurorack format modules.

SENSITIVITY
Acts as an attenuator for the incoming audio signal, allowing hotter signals to be brought down below the pulse output threshold. Simultaneously acts as a range control for the envelope follower’s CV output.

DECAY
Controls the decay of the CV output. A lower setting allows for a quick CV response that matches the audio input while a higher setting allows for more of a slew between amplitude peaks.

PULSE RESPONSE
This switch selects between two pulse response modes. Transient mode produces short pulses based on the CV output rises above approximately 2.5V. Sustained mode produces sustained pulses that are held at 5V when the CV output is higher than a ~2.5V threshold.

PREAMP

GAIN ATTENUATOR
Controls the amplification of the input signal. At fully closed the incoming signal will be completely silent and at fully open the maximum amount of gain will be applied.

INPUT
¼” TRS balanced instrument input jack.

GAIN MODE
Three gain modes (low, medium, high) are selectable based on how much amplification your audio input requires. Gain is applied after the Gain Attenuator.

IMPEDANCE
Two position switch for Mic mode for balanced signals (such as microphones) or Instrument mode for unbalanced signals (guitar, bass, or line-level audio such as keyboards or drum machines).

OUTPUT
Amplified audio output.

Price: £179.00 Inc VAT
Malekko SND/RTN Eurorack Audio i/o Module

Instrument/Line-level Send & Return Mixer

The SND/RTN module includes ¼ jacks for instrument and line level input with CV input to modulate the dry/wet mix as well as manual control over send and return levels (and a clip LED). Marry Malekko pedals and other outboard effects with your modular in 4hp.

FEATURES INCLUDE:

1/4 Instrument or line level input jacks
CV input for modulation of dry/wet mix
Manual control over SEND and RETURN levels
4hp

Price: £129.00 Inc VAT
Expert Sleepers ES-8 Eurorack USB Audio Interface Module

The ES-8 is a USB 2.0 class-compliant audio interface in a Eurorack module, with DC-coupled inputs and outputs that can be used for both CVs and audio. As such it is directly compatible with all popular computer-based CV generation software as well as audio and CV processing iOS apps.

The ES-8 also has ADAT inputs & outputs. This could be used for example to expand the output count via an Expert Sleepers ES-3 and/or ES-6, or to connect a traditional audio interface to add, say, mic preamps or 1/4" line outputs.

An expansion header allows connection of an Expert Sleepers ES-5, to which in turn you can connect our gate, CV and MIDI expanders.

The ES-8 has a high quality internal clock, and it can optionally sync to the clock from the input ADAT signal.

The ES-8's specifications are as follows:

Panel width: 8HP
Module depth: 50mm
Current draw: 198mA on the +12V rail, 52mA on the -12V rail (at 96kHz)
USB socket: Type B
Driver suport: class-compliant USB 2.0 (no Windows support currently)
Channel count: 12 in, 16 out
Supported sample rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz
Audio sample depth: 24 bit
Output connections: 8x 3.5mm TS jacks, DC-coupled
Maximum output voltage: approximately ±10V DC
Analogue inputs: 4x 3.5mm TS jacks, DC-coupled
Input voltage range: approximately ±10V
Digital I/O: 1x ADAT input, 1x ADAT output
Expansion headers: 1 for ES-5, 1 for ES-6

Price: £375.00 Inc VAT
Intellijel Headphones Eurorack 1U Module

Headphone and stereo output

High quality headphone amp capable of driving consumer and studio grade headphones with excellent bass response and loud levels.

This module can also be used as a line level stereo output.

Price: £75.00 Inc VAT