Boredbrain optx Eurorack ADAT Audio & CV Interface Module

Boredbrain optx Eurorack ADAT Audio & CV Interface Module

In stock

Eurorack ADAT Input/Output Module for both Control Voltage and Audio signals.

Straightforward ADAT Conversion
Optx is a compact and bi-directional ADAT lightpipe converter for eurorack synthesizers. The module provides 8 channels of input and output expansion to many pro audio interfaces, and may be used standalone to interconnect eurorack systems.
ADAT Encoding & Decoding
Some computer audio interfaces are equipped with one or more pairs of ADAT expansion ports allowing for additional input and output channels. Optx takes full advantage of these often unused ports, providing multi-channel connections directly to and from eurorack systems.
The module accepts any 8-channel ADAT encoded digital signal at the Rx TOSLINK jack (via lightpipe optical cable) and converts it into 8 discrete analog signals available at the OUT 1-8 jacks.
Conversely, Optx accepts 8 discrete analog signals at the IN 1-8 jacks and converts them into an 8-channel ADAT encoded digital signal available at the Tx jack.
The module’s analog outputs are DC-coupled, meaning signals can be AC (audio) or DC (control voltages). So when used in conjunction with software such as Bitwig Studio or Ableton CV Tools, Optx becomes an interface for outgoing control voltages like 1V/oct pitch and gate signals, or LFOs, ADSRs and other modulators. The amount of creative potential here cannot be overstated.
Sample Clock Synchronization
The module has three options for sample clock sync, selectable using the 3-way switch.
44.1 Generates and syncs to internal clock of 44.1 kHz
EXT Syncs to external clock from ADAT signal at Rx
48 Generates and syncs to internal clock of 48 kHz
*With the switch set to EXT, the blue EXT SYNC LED will illuminate when a valid sample clock is detected at Rx.
Signal LEDs
Optx also provides visual signal indication of the 8 decoded ADAT channels feeding the OUT 1-8 jacks. Each pair of WHITE LEDs indicates the polarity (-Ve left, +Ve right) and relative strength of the signal (± 10 V).
Audio-rate signals will generally light both LEDs continuously, whereas LFOs will alternate more apparently between the two. Gates, triggers and positive-going envelopes will generally light only the right LED (+Ve).

Technical Specs

Width: 8 HP
Depth: 1.5 in (38 mm)
Weight: 3.7 oz (105 g)
Resolution: 24 bit, 44.1/48 kHz
Max I/O Level: ± 10 V (20 Vpp)
Power: +12 V 78 mA, -12 V 78 mA

Copyright © 2022 All Rights Reserved.