Konstant Lab Filtered Bus Board 2 Eurorack Power Distributon Board

Konstant Lab Filtered Bus Board 2 Eurorack Power Distributon Board

£35.99
Sorry, this item is out of stock.
SKU
KONS09

Eurorack Bus Board

Filtered Bus Board #2 is our new bus board with extra filtered output headers and straight connectors.

Filtered Bus Board #2 is our new bus board with extra filtered output headers and straight connectors. This is an ideal bus board for all Konstant Lab power supplies but also works with other eurorack power supplies as well. Bus board contains 19 output headers. 13 direct headers with decoupling capacitors and 6 filtered headers with unique filtering circuits. Filtered headers are specially dedicated to feed analog modules that are sensitive/susceptible to power quality. Decoupling capacitors and LC filters reject noise caused by PSU and digital modules by 70%. Two 4 ways DIP switches can tune filtration capacity when some PSU has starting problems with big capacity on output – especially handy if you have a lot of digital modules present in your system. Each power rail is protected against over-voltage for your modules and systems safety. Filtered Bus Board #2 has the same filtering circuits as our successful Filtered Bus Board with angled connectors.

DIMENSIONS 39 × 3 cm
180 g
HEIGHT
20 mm with inserted connectors
 
INPUT TERMINALS 
Two shock resistant “Push to Connect” input terminals
 
DIRECT HEADERS
13
FILTERED HEADERS
6
TOTAL SHROUDED OUTPUT HEADERS
19
OTHER
Easy daisychain connection for more bus boards
LC filters with tunable capacity
Additional SMD filter capacitors on direct and filtered side
Output overvoltage protection – keep your modules safe
LEDs indicate present and drop of output voltage
Wide PCB tracks for low impedance
Continous ground plane on one PCB side
ACCESSORIES
8x Screws
8x plastic spacers with 3mm height
MAX. CURRENT
4000 mA for whole Busboard
2000 mA for FILTERED section
Copyright © 2022 www.signalsounds.com. All Rights Reserved.