Ritual Electronics Repression Eurorack 1U Comparator Module
Eurorack 1U Comparator Module
Répression is a feature packed CV controlled Comparator in 1U format
Répression is a feature packed CV controllable comparator.
Répression compares two signals. One at the Input. The other defined by the threshold pot and the CV Thrsh which is added to the pot. It outputs 4 signals based on the result of the operation.
Above is high if the Input is above the threshold.
Below is high if the Input is below the threshold.
Equal outputs a trigger when the input and threshold values are the same.
Bipolar is a +/-5V version of the Above output. Very useful when using the comparator for audio duties. I.e. PWM generator, complex oscillator…
The Threshold knob has a +/- 8.1V range.
- Threshold knob (bipolar: -/+ 8.1V) – acting as an offset to the comparator’s negative terminal)
Ritual Electronics Répression requires:
- 53mA on +12V
- 26mA on -12V
- 0mA on +5V
You will need 12HP of free space in your Eurorack case to install Répression. The module is 35mm deep.
Connect the included ribbon cable to the module. Connect the other end of the cable to the bus board connector of your case.
Répression is a 1U module, you will need a 1U rack space – Intellijel format.
- Entirely new design
- Above output
- Below output
- Equal output (trigger)
- Bipolar output (bipolar Above)
- 35 mm deep
- 12HP wide