Gate Randomizer
GR1 is a single channel randomizer with Gate input, Reset input, Momentary output, and Latching output.
Randomization is determined on the rising edge of the Gate input.
The Reset input is asynchronous and will force the outputs low. Keeping the Reset input high will inhibit the Gate input.
GR1 can be used to randomize Gates, Triggers, Clock, or even the output from a square VCO to make some vintage computer noises.
Our hybrid 1U front panels use the dimensions as defined by Intellijel, and the open slots make these compatible with cases using the Pulp Logic format.
Dimensions
6 HP
35 mm deep
Â
Current Draw
35 mA +12V
0 mA -12V
0 mA 5V
Product Overview
Gate Randomizer
GR1 is a single channel randomizer with Gate input, Reset input, Momentary output, and Latching output.
Randomization is determined on the rising edge of the Gate input.
The Reset input is asynchronous and will force the outputs low. Keeping the Reset input high will inhibit the Gate input.
GR1 can be used to randomize Gates, Triggers, Clock, or even the output from a square VCO to make some vintage computer noises.
Our hybrid 1U front panels use the dimensions as defined by Intellijel, and the open slots make these compatible with cases using the Pulp Logic format.