Zlob Modular Entropy Eurorack Sample and Hold/Random Module

Zlob Modular Entropy Eurorack Sample and Hold/Random Module

In stock

Eurorack Random and Noise Module

Entropy is a 3hp analog random voltage and noise generator Eurorack Module available as a Eurorack DIY Kit, PCB and Panel, or Built.

It features sample/track and hold normalled to white noise with a toggle switch for selecting sample(switch right position) or track(switch left position) and hold function. There is also a PCB trimmer(at the top of the motherboard) to adjust the spread(gain) of random voltages out from “scalar” (low gain, counter clock wise) to large interval jumping(high gain, clock wise). All analog white, pink, and brown(red) noise 10vpp~(dependent on lower PCB trim). Smooth(infra red) random cv out at 10vpp with 2 range settings from wiggly with (more events, switch in left position) to almost random rise and fall envelope behavior (less events, switch in right position). White noise pcb trimmer sets the amplitude of the noise which in turn influences the rate of the infra out. LED solder mask windows indicate positive(red) and negative(blue) voltage crossings

  • Width: 3hp
  • Panel Material: PCB
  • Reverse Power Protected
  • Current Consumption: +12v: 10mA, -12v: 10mA
  • Depth: 47mm
  • Ships with M3 black nylon screws

Copyright © 2021 www.signalsounds.com. All Rights Reserved.