Modul A-190-2 is an economically priced alternative to the MIDI-CV/SYNC interface A-190-1. It can be used in all cases where the additional features of the A-190-1 are not required (e.g. clock output, start/stop output). A-190-2 is the modular version of the established MCV4. Only some minor changes were made for a better adaption to the A-100 system, e.g. five 3.5 mm sockets, zero-symmetrical CV for pitch bend to be able to adjust the pitch bend range e.g. in combination with the precision CV adder A-185-2, glide function.
These are the most important features of the A-190-2:
Midi CV/Gate interface
Gate output 0/+5V
CV1: this voltage is derived from incoming Midi note messages (0...+5V / 5 octaves), the glide control affects this CV output
CV2: this voltage is derived from incoming Midi pitch bend messages (-2.5 ... +2.5V)
CV3: this voltage is derived from the multiplication of incoming Midi volume messages and the velocity data of the note messages (0...+5V)
CV4: this voltage is derived from a freely adjustable Midi control change message (0...+5V)
Midi channel, reference note for 0V CV1 and the midi control change number for CV4 are adjusted by means of the learn button.
Glide control: portamento/slew limiter function for CV1
Product Overview
Modul A-190-2 is an economically priced alternative to the MIDI-CV/SYNC interface A-190-1. It can be used in all cases where the additional features of the A-190-1 are not required (e.g. clock output, start/stop output). A-190-2 is the modular version of the established MCV4. Only some minor changes were made for a better adaption to the A-100 system, e.g. five 3.5 mm sockets, zero-symmetrical CV for pitch bend to be able to adjust the pitch bend range e.g. in combination with the precision CV adder A-185-2, glide function.
These are the most important features of the A-190-2:
Midi CV/Gate interface
Gate output 0/+5V
CV1: this voltage is derived from incoming Midi note messages (0...+5V / 5 octaves), the glide control affects this CV output
CV2: this voltage is derived from incoming Midi pitch bend messages (-2.5 ... +2.5V)
CV3: this voltage is derived from the multiplication of incoming Midi volume messages and the velocity data of the note messages (0...+5V)
CV4: this voltage is derived from a freely adjustable Midi control change message (0...+5V)
Midi channel, reference note for 0V CV1 and the midi control change number for CV4 are adjusted by means of the learn button.
Glide control: portamento/slew limiter function for CV1
