Instruments of Things 2.4 SINK Eurorack Wireless CV Module

Instruments of Things 2.4 SINK Eurorack Wireless CV Module

In stock

Wifi Connectivity Eurorack Module

Wireless CV interface for Eurorack modular synthesizers. Connect: 2.4SINK motion sensors, Ableton Link, OSC applications and Bluetooth MIDI controllers.

2.4SINK allows wireless connections to our high precision motion sensors with low latency to create highly expressive and unique stage performances. Additionally, 2.4SINK is compatible with Ableton Link, Open Sound Control (OSC) and Bluetooth® MIDI to use a wide range of applications (e.g. Max, Pure Data, SuperCollider), sensors and maker technologies (e.g. Arduino®). Built-in LFOs and 16 multimode outputs cover all kinds of control signals.

Key Features

16 (12-bit) multimode CV outputs
Unipolar mode (0 to +10V) /
Bipolar mode (-5V to +5V) /
Gate/Trigger mode (0 to +10V) /

 Optional Motion sensors
Convert your movements into control voltages /
3D tilt angles and acceleration axes /
Theremin comparable precision /
No perceivable latency /
Up to seven sensors simultaneously /
Custom firmware with 9-DOF state-of-the-art sensor fusion /

Built-in LFOs
Waveforms: Sine, Saw, Ramp, Triangle, Square, Stepped Noise or Clock (0V to +5V) /
Frequency modulation via sensor data /

Built-in Web App
Wi-Fi configuration /
Connect Bluetooth® LE devices /
Map and scale sensor values /
Output configuration /
Firmware Upgrades /

Open Sound Control (OSC)
Connect OSC applications via Wi-Fi /
Simple address scheme to easily adapt 2.4SINK to your application /

Ableton Link
Customizable (real) clock divider for each output /
Synced LFOs to Ableton Link clock /

Max for Live devices
Use Ableton Live as a sequencer or to transmit automations /
CC, Gate, Pitch, Velocity, Pitchbend, Aftertouch signals transmitted to 2.4SINK /
Up to 16 automations simultaneously /

Bluetooth® LE MIDI
Use Bluetooth® MIDI devices to control your rack /
Support for Control Change, Gate, Pitch, Velocity, Pitchbend and Aftertouch /

Power Consumption
+12V: 250 mA / -12V: 30 mA /

Width: 10HP

Easy configuration

The built-in web app gives users total and easy control over the module. Wi-Fi can be configured in Access Point or Client mode. Supported Bluetooth® LE devices (e.g. our branded Movesense® sensors or Bluetooth LE MIDI compatible devices) are shown and can be coupled under Bluetooth® LE configuration section with a single click. Afterwards, the specific sensor values can be mapped and scaled in the CV configuration section for each output. The settings are persisted in the internal flash memory.

Hands free – Once configured, the web app is no longer needed for performing.

Copyright © 2021 All Rights Reserved.