Manufacturer's description
Born from the legendary DNA of the 1996 Orgon System Enigiser, transformed into the expanded swENIGISER and finally taking the next evolutionary step, the SWEN2 by Analog Sweden is a child of 2026. We took the untamed, raw analog soul of the original design and fused it with a digital brain.
The result? An absolute powerhouse of a monophonic desktop synthesizer that delivers an unparalleled, creative playground for sound designers, producers, and electronic artists.
- Authentic Vintage Core, Modern Precision: Built with the exact same analog circuits as the highly sought-after original, updated with modern SMT components for improved noise floor, lower cost and superior reliability.
- Forget calibration problems: SWEN2 features an auto calibration web based interface and simply firmware update.
- A Pure Analog-Digital Hybrid: We added a MCU to supercharge your workflow with a second oscillator, MIDI, clock-syncable LFO, auto-calibration, and a generative sequencer.
- The Legendary 12-Mode Proto VCF/A: Features a filter based entirely on an early, secret protoboard variant of the original Enigiser, giving you unparalleled sculpting power from lush lowpasses to aggressive bandpasses.
- Travel-Ready Power: Housed in a sturdy, powder-coated aluminum and steel chassis. At just 1.5 kg and a footprint of 250x200x50 mm, it runs via USB-C or a standard power bank for mobile production.
Deep Dive Into the Engine
1. The Oscillators & Sound Sources
- VCO (Analog Oscillator): Features six selectable waves (Sine, Triangle, Square, PWM Pulse, PWM Saw, and Off) with dedicated octave selection and fine/coarse tuning toggles.
- Ghost OSC2: Always follows your VCO pitch with a slight, reactive analog delay that instantly fattens up your signal like a lush chorus. Can be detuned +-1 octave or switched to an EQ-able White Noise source.
- Dual Sub Oscillators: Add massive low-end "oumph" with a dedicated Sub-Sine routed straight to the VCA, or switch on the Roland SH-101-style -1 Octave Square Sub.
2. The 12-Mode Proto Multimode Filter
Based on an ultra-rare prototype lent by Anthony Linell (Northern Electronics), this filter utilizes 4x 6dB cells in series. Dial in everything from classic lowpass tracking to self-oscillating resonance. Want magic? Set the resonance high and "ping" the filter with brief audio pulses. Mix your dry and wet signals perfectly via the crossfader-style VCO/VCF Mix.
3. The Proto Amplifier (VCA) with Clip Drive
Experience improved signal-to-noise ratio by 6dB alongside adjustable positive or negative CV offset—perfect for dialing in continuous drone pads or truncating envelopes into sharp, plucky micro-sounds. Flip the integrated CLIP switch to engage dual diodes for gritty, asymmetric saturation and aggressive overdrive.
4. GSEQ: The Generative Brain
The GSEQ is an intuitive, endlessly inspiring 4-pattern by 2 to 16-step generative sequencer. Simply hold the GEN button to watch new melodies randomly generated on the fly.
- Quantize instantly to 6 scale modes (including Octaves, Pentatonic, and MIDI Note Input).
- Control note probability, note range (up to 5 octaves), and step playback length.
- Randomly weighted accents, slides, and advanced directional playback modes (Forward, Reverse, Ping-Pong, Random) keep your patterns alive and shifting.
5. MIDI
Classic 5-pin midi input along with USB-C input and output from GSEQ. CC
Advanced Eurorack Patchbay & Connectivity
No gate converters needed. The SWEN2 comes equipped with a comprehensive 28-point patchbay on the front panel to natively integrate with your modular system or external gear:
- Audio I/O: Dedicated Headphone Out (Dual Mono), Eurorack Level Audio Out, and External Audio Input.
- CV Inputs: 4 general CV inputs routed to mod source selectors + linear FM, pulse/saw shape width, LFO 2 frequency, and dedicated VCF cutoff control.
- GSEQ: Clock in/out and CV+Trig out
- Audio Outputs: Independent waveform outputs for Sine, Triangle, Pulse, Saw, and OSC2 to modulate external gear at audio-rate.
- CV Outputs: LFO1, LFO2, Envelope 1,2,3 ready as external or internal modulation sources
- Rear Panel: Full 5-pin DIN MIDI Input, 6.3mm Audio Output, USB-C for both midi and power and a dedicated DC Input for increased redundancy.
Ready to revolutionize your sound? The SWEN2 takes you from pristine, deep-sub analog baselines to chaotic, overdriven modular soundscapes in a fraction of a second. Pack it in your backpack, plug in your powerbank, and start creating anywhere!
How much is my shipping?
Shipping is automatically calculated before you submit your payment information. Simply add items to your cart and proceed to the checkout page, where you'll be offered shipping options and their prices. In the UK, 'next working day' shipping is free to most parts of the UK if the order value is over £150, and £5 otherwise. We can also ship on a 'next working day before 12pm' service, which costs £6 for orders over £150 and £7.50 for orders under £150.
Certain areas of the UK, including the Scottish Highlands and Islands, Northern Ireland and other offshore islands, may have higher shipping charges and slightly longer delivery times due to surcharges applied by the courier and reduced service availability in those areas. We try to keep these costs to a minimum.
Do you ship to my country?
Almost certainly - the site will give you an estimate of shipping costs if you add an item to the cart and then enter your country and postcode. If you have specific requirements (such as if you prefer UPS over FedEx, for example) then let us know in advance and we'll try to work something out for you.
Shipping methods
We use a combination of DPD and Royal Mail for the UK, and for international orders it's either DPD, DHL, FedEx, UPS or Royal Mail depending on where you are in the world. If you have a particular preference then try to let us know BEFORE you order so we can look into it for you. Please note that there may occasionally be additional shipping charges if you live in a remote area, depending on what surcharges are applied by the shipper. We'll get in touch to discuss this with you in such cases.
Dispatch times
For UK orders, we normally dispatch the same working day if we get the order before 16:00. If you have a really urgent situation then of course drop us an email before ordering and we'll always do our absolute best to accommodate you.
Please note that 'next day' delivery is an aim, not a guarantee. The vast majority of orders shipped on a 'next day' service do arrive the next day, but occasionally couriers experience unforeseen delays due to weather or traffic conditions etc.
For international orders, we normally dispatch the same day if we get the order before 13:00 but again, occasionally it might be the next day before we can send it out, and sometimes the couriers may come to collect a little earlier than scheduled which would also push an order into the next day.
Saturday/Sunday delivery
If you're in the UK and you order before 16:00 on a Friday then we can send something for a Saturday or Sunday delivery with DPD. This is FREE for order values over £350, £5 for order values between £75 and £250, and £7 for order values under £75. (NB: this applies to UK mainland addresses only). Please note that any orders placed after 16:00 on a Friday will ship on the Monday.
International shipping times
Most orders are delivered within 3 to 5 working days if sent on a courier service. Royal Mail services can take a lot longer and are often less secure.
Pre-orders
If a product is listed as a pre-order, it means we've ordered it from the supplier but it's not physically in stock yet. The product listing will include an estimated shipping date based on the best information we have from the supplier, but do bear in mind this is subject to change and is not a guaranteed date.
If you place an order containing a mixture of in-stock and pre-order items, we'll normally hold off on shipping anything until the pre-order item(s) have arrived, rather than splitting it into multiple shipments. If you need the in-stock items sooner, we'd recommend placing separate orders. As always, please get in touch if you have questions.
Product Overview
Manufacturer's description
Born from the legendary DNA of the 1996 Orgon System Enigiser, transformed into the expanded swENIGISER and finally taking the next evolutionary step, the SWEN2 by Analog Sweden is a child of 2026. We took the untamed, raw analog soul of the original design and fused it with a digital brain.
The result? An absolute powerhouse of a monophonic desktop synthesizer that delivers an unparalleled, creative playground for sound designers, producers, and electronic artists.
- Authentic Vintage Core, Modern Precision: Built with the exact same analog circuits as the highly sought-after original, updated with modern SMT components for improved noise floor, lower cost and superior reliability.
- Forget calibration problems: SWEN2 features an auto calibration web based interface and simply firmware update.
- A Pure Analog-Digital Hybrid: We added a MCU to supercharge your workflow with a second oscillator, MIDI, clock-syncable LFO, auto-calibration, and a generative sequencer.
- The Legendary 12-Mode Proto VCF/A: Features a filter based entirely on an early, secret protoboard variant of the original Enigiser, giving you unparalleled sculpting power from lush lowpasses to aggressive bandpasses.
- Travel-Ready Power: Housed in a sturdy, powder-coated aluminum and steel chassis. At just 1.5 kg and a footprint of 250x200x50 mm, it runs via USB-C or a standard power bank for mobile production.
Deep Dive Into the Engine
1. The Oscillators & Sound Sources
- VCO (Analog Oscillator): Features six selectable waves (Sine, Triangle, Square, PWM Pulse, PWM Saw, and Off) with dedicated octave selection and fine/coarse tuning toggles.
- Ghost OSC2: Always follows your VCO pitch with a slight, reactive analog delay that instantly fattens up your signal like a lush chorus. Can be detuned +-1 octave or switched to an EQ-able White Noise source.
- Dual Sub Oscillators: Add massive low-end "oumph" with a dedicated Sub-Sine routed straight to the VCA, or switch on the Roland SH-101-style -1 Octave Square Sub.
2. The 12-Mode Proto Multimode Filter
Based on an ultra-rare prototype lent by Anthony Linell (Northern Electronics), this filter utilizes 4x 6dB cells in series. Dial in everything from classic lowpass tracking to self-oscillating resonance. Want magic? Set the resonance high and "ping" the filter with brief audio pulses. Mix your dry and wet signals perfectly via the crossfader-style VCO/VCF Mix.
3. The Proto Amplifier (VCA) with Clip Drive
Experience improved signal-to-noise ratio by 6dB alongside adjustable positive or negative CV offset—perfect for dialing in continuous drone pads or truncating envelopes into sharp, plucky micro-sounds. Flip the integrated CLIP switch to engage dual diodes for gritty, asymmetric saturation and aggressive overdrive.
4. GSEQ: The Generative Brain
The GSEQ is an intuitive, endlessly inspiring 4-pattern by 2 to 16-step generative sequencer. Simply hold the GEN button to watch new melodies randomly generated on the fly.
- Quantize instantly to 6 scale modes (including Octaves, Pentatonic, and MIDI Note Input).
- Control note probability, note range (up to 5 octaves), and step playback length.
- Randomly weighted accents, slides, and advanced directional playback modes (Forward, Reverse, Ping-Pong, Random) keep your patterns alive and shifting.
5. MIDI
Classic 5-pin midi input along with USB-C input and output from GSEQ. CC
Advanced Eurorack Patchbay & Connectivity
No gate converters needed. The SWEN2 comes equipped with a comprehensive 28-point patchbay on the front panel to natively integrate with your modular system or external gear:
- Audio I/O: Dedicated Headphone Out (Dual Mono), Eurorack Level Audio Out, and External Audio Input.
- CV Inputs: 4 general CV inputs routed to mod source selectors + linear FM, pulse/saw shape width, LFO 2 frequency, and dedicated VCF cutoff control.
- GSEQ: Clock in/out and CV+Trig out
- Audio Outputs: Independent waveform outputs for Sine, Triangle, Pulse, Saw, and OSC2 to modulate external gear at audio-rate.
- CV Outputs: LFO1, LFO2, Envelope 1,2,3 ready as external or internal modulation sources
- Rear Panel: Full 5-pin DIN MIDI Input, 6.3mm Audio Output, USB-C for both midi and power and a dedicated DC Input for increased redundancy.
Ready to revolutionize your sound? The SWEN2 takes you from pristine, deep-sub analog baselines to chaotic, overdriven modular soundscapes in a fraction of a second. Pack it in your backpack, plug in your powerbank, and start creating anywhere!
Technical Specs
Shipping Details
How much is my shipping?
Shipping is automatically calculated before you submit your payment information. Simply add items to your cart and proceed to the checkout page, where you'll be offered shipping options and their prices. In the UK, 'next working day' shipping is free to most parts of the UK if the order value is over £150, and £5 otherwise. We can also ship on a 'next working day before 12pm' service, which costs £6 for orders over £150 and £7.50 for orders under £150.
Certain areas of the UK, including the Scottish Highlands and Islands, Northern Ireland and other offshore islands, may have higher shipping charges and slightly longer delivery times due to surcharges applied by the courier and reduced service availability in those areas. We try to keep these costs to a minimum.
Do you ship to my country?
Almost certainly - the site will give you an estimate of shipping costs if you add an item to the cart and then enter your country and postcode. If you have specific requirements (such as if you prefer UPS over FedEx, for example) then let us know in advance and we'll try to work something out for you.
Shipping methods
We use a combination of DPD and Royal Mail for the UK, and for international orders it's either DPD, DHL, FedEx, UPS or Royal Mail depending on where you are in the world. If you have a particular preference then try to let us know BEFORE you order so we can look into it for you. Please note that there may occasionally be additional shipping charges if you live in a remote area, depending on what surcharges are applied by the shipper. We'll get in touch to discuss this with you in such cases.
Dispatch times
For UK orders, we normally dispatch the same working day if we get the order before 16:00. If you have a really urgent situation then of course drop us an email before ordering and we'll always do our absolute best to accommodate you.
Please note that 'next day' delivery is an aim, not a guarantee. The vast majority of orders shipped on a 'next day' service do arrive the next day, but occasionally couriers experience unforeseen delays due to weather or traffic conditions etc.
For international orders, we normally dispatch the same day if we get the order before 13:00 but again, occasionally it might be the next day before we can send it out, and sometimes the couriers may come to collect a little earlier than scheduled which would also push an order into the next day.
Saturday/Sunday delivery
If you're in the UK and you order before 16:00 on a Friday then we can send something for a Saturday or Sunday delivery with DPD. This is FREE for order values over £350, £5 for order values between £75 and £250, and £7 for order values under £75. (NB: this applies to UK mainland addresses only). Please note that any orders placed after 16:00 on a Friday will ship on the Monday.
International shipping times
Most orders are delivered within 3 to 5 working days if sent on a courier service. Royal Mail services can take a lot longer and are often less secure.
Pre-orders
If a product is listed as a pre-order, it means we've ordered it from the supplier but it's not physically in stock yet. The product listing will include an estimated shipping date based on the best information we have from the supplier, but do bear in mind this is subject to change and is not a guaranteed date.
If you place an order containing a mixture of in-stock and pre-order items, we'll normally hold off on shipping anything until the pre-order item(s) have arrived, rather than splitting it into multiple shipments. If you need the in-stock items sooner, we'd recommend placing separate orders. As always, please get in touch if you have questions.
