+5V Low-Cost Adapter
+5V@100 mA plug-in module
This module can be plugged into a free socket on the bus board for older A-100 modules which require +5V (e.g. A-113, A-190) or for modules from other manufacturers. The current is taken from the 12V supply !
Required only if +5V are needed and an older power supply (A-100NT12 or A-100PSU2) or the A-100 DIY supply is used.
Important technical note: Do not install the A-100AD5 when the A-100PSU3 is used ! This may damage the A-100PSU3 and/or the A-100AD5 !
Product Overview
+5V Low-Cost Adapter
+5V@100 mA plug-in module
This module can be plugged into a free socket on the bus board for older A-100 modules which require +5V (e.g. A-113, A-190) or for modules from other manufacturers. The current is taken from the 12V supply !
Required only if +5V are needed and an older power supply (A-100NT12 or A-100PSU2) or the A-100 DIY supply is used.
Important technical note: Do not install the A-100AD5 when the A-100PSU3 is used ! This may damage the A-100PSU3 and/or the A-100AD5 !
