26 HP/TE width, up to 26mm in depth (super slim & therefore shuttle friendly)
Dual voltage controlled AD/AR/looping envelope generators with arbitrary voltage controlled slope shapes: from EXP to LIN to LOG without stretching the time length of a certain slope
1 volt per octave control over envelopes in the looping mode (to use the envelopes as band-limited oscillators)
Dual opto-coupler controlled gates with universal sockets for a quick and simple exchange: one can use the factory supplied opto-couplers, replace them with other ones or even roll your own: slow, fast, ringing – whatever!
Voltage controlled cabin pressure effect (delay). Add space to the final mix with the proper CV and TAP controls
Don’t forget the stereo – a dedicated stereo headphone output with voltage controllable panning
Expand the Terminal with our Terminal Xpander (coming soon) which gives you access to all of Terminals hidden functions
The power consumption of the module is as follows: max 185 mA from the +12V rail and max 115 mA from the -12V rail or up to 300 mA in total. No +5V bus power is required.