Ventilator condensed
We did it! We squeezed our highly acclaimed Ventilator technology into a standard size stompbox enclosure. But while we cut corners in size, we didn't cut corners in sound quality. The micro Vents feature an equally powerful DSP as its bigger brothers, Ventilator II and mini Vent II. We even added a new circuit - an analog blend - providing latency free mixing-in of the dry signal.
micro Vent 122
Just like its brothers Ventilator II and mini Vent II, the micro Vent 122 is modeled after the Leslie 122 rotary speaker. The algorithm simulates the classic micing technique with one mic for the horn and one mic for the drum rotor. The distance of both mics can be varied with the DISTANCE pot. Just like the monstrous original, the micro Vent 122 sounds rich and complex with deep movement and modulation. Perfect for rotary sounds that shall stand out.
Switch Modes
The micro Vent´s BYPASS switch offers a lot more than you'd think. Use it to switch the effect on and off or select between the two speeds. Various different modes determine if switching is done momentarily or latching. You can also use the BYPASS switch to select speeds exclusively, leaving the effect on all the time. This comes in handy when the unit is used together with switching loopers, inspiring highly creative performances.
Two Speeds
The micro Vent has two adjustable speeds. Speed 1 is controlled with a pot and ranges continuously from Slow to Fast, providing intermediate speeds as well; Speed 2 is selected via a 3-way switch featuring the standard speeds – Slow, Fast and Stop. Special SWITCH MODES provide flexible switching, e.g. from Slow to Fast, Fast to Slow, Slow to Stop, Stop to Fast, etc. The combinations are almost limitless.The RAMP parameter determines acceleration and deceleration between the two speeds. You will never get tired of listening to the rotors spooling up and down, recreating the sounds that made the originals so glorious.
Think big
The micro Vent's compact super sturdy housing hosts an insanely powerful SHARC DSP with the same processing power as the one found in the Ventilator II. For the analog circuitry only the best components were chosen to ensure a no-compromise sound that will satisfy you.
Power requirements are 9V DC with standard negative polarity, so the micro Vent integrates easily in larger pedalboards with a central PSU.
Analog Blend
Pros like Stevie Ray Vaughan, David Gilmour and many more got their distinct sound on recordings and on stage with a simple trick: they mixed the rotary speaker and guitar amp signals together. To achieve a similar effect with only one amp, the micro Vent features an analog BLEND circuit, providing an uncolored and latency free mixing-in of the dry signal for that classic rotary sound we all know and love.
Key Features
- For guitar, bass and keys
- Leslie 122 emulation (micro Vent 122), Vibratone emulation (micro Vent 16)
- Extremely powerful SHARC DSP
- Standard size stompbox enclosure
- 9V DC standard negative polarity
- Mono in / mono out
- Two selectable Speeds (Speed1 continous, Speed2 Slow/Stop/Fast)
- Variable microphone to rotors distance
- Analog Blend
- Silent Footswitch with 5 operating modes for Bypass and Speed select
- True Bypass or Buffered Bypass
Specs
- Signal processing: 32 Bit SHARC DSP
- Analog Digital Conversion: 48khz, 24 Bit
- Digital Analog Conversion: 48khz, 24 Bit
- Noise Level: -90 dBA
- Max Input Level: +5 dBV
- Input Impedance: 0.5MOhm
- Output Impedance: 400 Ohms
- Recommended Load Impedance: 10 KOhms or more
- Weight: 235g / 8 oz
- Dimensions (W x D x H): 113x 65x 47mm
- Current Draw : 180mA
- Connectors: Input, Output, DC In
How much is my shipping?
Shipping is automatically calculated before you submit your payment information. Simply add items to your cart and proceed to the checkout page, where you'll be offered shipping options and their prices. In the UK, 'next working day' shipping is free if the order value is over £150, and £5 otherwise. We can also ship on a 'next working day before 12pm' service, which costs £6 for orders over £150 and £7.50 for orders under £150.
Shipping to mainland EU typically costs between £7 and £20, depending on the shipping method and the size and weight of the order.
Do you ship to my country?
Almost certainly - the site will give you an estimate of shipping costs if you add an item to the cart and then enter your country and postcode. If you have specific requirements (such as if you prefer UPS over FedEx, for example) then let us know in advance and we'll try to work something out for you.
Shipping methods
We use a combination of DPD, Royal Mail and Parcelforce for the UK, and for international orders it's either DHL, FedEx, UPS, Royal Mail or Parcelforce depending on where you are in the world. If you have a particular preference then try to let us know BEFORE you order so we can look into it for you. Please note that there may occasionally be additional shipping charges if you live in a remote area, depending on what surcharges are applied by the shipper. We'll get in touch to discuss this with you in such cases.
Dispatch times
For UK orders, we aim to dispatch the same working day if we get the order before 16:00. If you have a really urgent situation then of course drop us an email before ordering and we'll always do our absolute best to accommodate you.
For international orders, we normally dispatch the same day if we get the order before 13:00 but again, occasionally it might be the next day before we can send it out, and sometimes the couriers may come to collect a little earlier than scheduled which would also push an order into the next day.
Saturday/Sunday shipping
If you're in the UK and you order before 16:00 on a Friday then we can send something for a Saturday or Sunday delivery with DPD. This is FREE for order values over £350, £5 for order values between £75 and £250, and £7 for order values under £75. (NB: this applies to UK mainland addresses only). Please note that any orders placed after 16:00 on a Friday will ship on the Monday.
International shipping times
Since April 2020, the couriers we use have suspended guarantees for shipping times, so even though we're paying them for priority services - 24-48 hours for most of the world - in practice it's often an extra day on top and sometimes it can be longer. There is absolutely nothing we can do about this, unfortunately. If you are outside the UK and it's a life-or-death situation where you absolutely MUST have that passive mult for the next day then... it may be better to find a local supplier.
Pre-orders
If a product is listed as a pre-order, it means we've ordered it from the supplier but it's not physically in stock yet. The product listing will include an estimated shipping date based on the best information we have from the supplier, but do bear in mind this is subject to change and is not a guaranteed date.
If you place an order containing a mixture of in-stock and pre-order items, we'll normally hold off on shipping anything until the pre-order item(s) have arrived, rather than splitting it into multiple shipments. If you need the in-stock items sooner, we'd recommend placing separate orders. As always, please get in touch if you have questions.
Product Overview
Ventilator condensed
We did it! We squeezed our highly acclaimed Ventilator technology into a standard size stompbox enclosure. But while we cut corners in size, we didn't cut corners in sound quality. The micro Vents feature an equally powerful DSP as its bigger brothers, Ventilator II and mini Vent II. We even added a new circuit - an analog blend - providing latency free mixing-in of the dry signal.
micro Vent 122
Just like its brothers Ventilator II and mini Vent II, the micro Vent 122 is modeled after the Leslie 122 rotary speaker. The algorithm simulates the classic micing technique with one mic for the horn and one mic for the drum rotor. The distance of both mics can be varied with the DISTANCE pot. Just like the monstrous original, the micro Vent 122 sounds rich and complex with deep movement and modulation. Perfect for rotary sounds that shall stand out.
Switch Modes
The micro Vent´s BYPASS switch offers a lot more than you'd think. Use it to switch the effect on and off or select between the two speeds. Various different modes determine if switching is done momentarily or latching. You can also use the BYPASS switch to select speeds exclusively, leaving the effect on all the time. This comes in handy when the unit is used together with switching loopers, inspiring highly creative performances.
Two Speeds
The micro Vent has two adjustable speeds. Speed 1 is controlled with a pot and ranges continuously from Slow to Fast, providing intermediate speeds as well; Speed 2 is selected via a 3-way switch featuring the standard speeds – Slow, Fast and Stop. Special SWITCH MODES provide flexible switching, e.g. from Slow to Fast, Fast to Slow, Slow to Stop, Stop to Fast, etc. The combinations are almost limitless.The RAMP parameter determines acceleration and deceleration between the two speeds. You will never get tired of listening to the rotors spooling up and down, recreating the sounds that made the originals so glorious.
Think big
The micro Vent's compact super sturdy housing hosts an insanely powerful SHARC DSP with the same processing power as the one found in the Ventilator II. For the analog circuitry only the best components were chosen to ensure a no-compromise sound that will satisfy you.
Power requirements are 9V DC with standard negative polarity, so the micro Vent integrates easily in larger pedalboards with a central PSU.
Analog Blend
Pros like Stevie Ray Vaughan, David Gilmour and many more got their distinct sound on recordings and on stage with a simple trick: they mixed the rotary speaker and guitar amp signals together. To achieve a similar effect with only one amp, the micro Vent features an analog BLEND circuit, providing an uncolored and latency free mixing-in of the dry signal for that classic rotary sound we all know and love.
Key Features
- For guitar, bass and keys
- Leslie 122 emulation (micro Vent 122), Vibratone emulation (micro Vent 16)
- Extremely powerful SHARC DSP
- Standard size stompbox enclosure
- 9V DC standard negative polarity
- Mono in / mono out
- Two selectable Speeds (Speed1 continous, Speed2 Slow/Stop/Fast)
- Variable microphone to rotors distance
- Analog Blend
- Silent Footswitch with 5 operating modes for Bypass and Speed select
- True Bypass or Buffered Bypass
Specs
- Signal processing: 32 Bit SHARC DSP
- Analog Digital Conversion: 48khz, 24 Bit
- Digital Analog Conversion: 48khz, 24 Bit
- Noise Level: -90 dBA
- Max Input Level: +5 dBV
- Input Impedance: 0.5MOhm
- Output Impedance: 400 Ohms
- Recommended Load Impedance: 10 KOhms or more
- Weight: 235g / 8 oz
- Dimensions (W x D x H): 113x 65x 47mm
- Current Draw : 180mA
- Connectors: Input, Output, DC In
Technical Specs
Shipping Details
How much is my shipping?
Shipping is automatically calculated before you submit your payment information. Simply add items to your cart and proceed to the checkout page, where you'll be offered shipping options and their prices. In the UK, 'next working day' shipping is free if the order value is over £150, and £5 otherwise. We can also ship on a 'next working day before 12pm' service, which costs £6 for orders over £150 and £7.50 for orders under £150.
Shipping to mainland EU typically costs between £7 and £20, depending on the shipping method and the size and weight of the order.
Do you ship to my country?
Almost certainly - the site will give you an estimate of shipping costs if you add an item to the cart and then enter your country and postcode. If you have specific requirements (such as if you prefer UPS over FedEx, for example) then let us know in advance and we'll try to work something out for you.
Shipping methods
We use a combination of DPD, Royal Mail and Parcelforce for the UK, and for international orders it's either DHL, FedEx, UPS, Royal Mail or Parcelforce depending on where you are in the world. If you have a particular preference then try to let us know BEFORE you order so we can look into it for you. Please note that there may occasionally be additional shipping charges if you live in a remote area, depending on what surcharges are applied by the shipper. We'll get in touch to discuss this with you in such cases.
Dispatch times
For UK orders, we aim to dispatch the same working day if we get the order before 16:00. If you have a really urgent situation then of course drop us an email before ordering and we'll always do our absolute best to accommodate you.
For international orders, we normally dispatch the same day if we get the order before 13:00 but again, occasionally it might be the next day before we can send it out, and sometimes the couriers may come to collect a little earlier than scheduled which would also push an order into the next day.
Saturday/Sunday shipping
If you're in the UK and you order before 16:00 on a Friday then we can send something for a Saturday or Sunday delivery with DPD. This is FREE for order values over £350, £5 for order values between £75 and £250, and £7 for order values under £75. (NB: this applies to UK mainland addresses only). Please note that any orders placed after 16:00 on a Friday will ship on the Monday.
International shipping times
Since April 2020, the couriers we use have suspended guarantees for shipping times, so even though we're paying them for priority services - 24-48 hours for most of the world - in practice it's often an extra day on top and sometimes it can be longer. There is absolutely nothing we can do about this, unfortunately. If you are outside the UK and it's a life-or-death situation where you absolutely MUST have that passive mult for the next day then... it may be better to find a local supplier.
Pre-orders
If a product is listed as a pre-order, it means we've ordered it from the supplier but it's not physically in stock yet. The product listing will include an estimated shipping date based on the best information we have from the supplier, but do bear in mind this is subject to change and is not a guaranteed date.
If you place an order containing a mixture of in-stock and pre-order items, we'll normally hold off on shipping anything until the pre-order item(s) have arrived, rather than splitting it into multiple shipments. If you need the in-stock items sooner, we'd recommend placing separate orders. As always, please get in touch if you have questions.
