XODES BCI Eurorack Black Card Interface Module (Erica Black Hole V1)
The 2HP versions of BCI allow you to use cards made for the Tiptop Audio Z-DSP with the Black Hole DSP MK1, MK2 or Pico DSP from Erica Synths.
Black Card Interface (Backpack)
The 2HP versions of BCI allow you to use cards made for the Tiptop Audio Z-DSP with the Black Hole DSP Mk 1 from Erica Synths.
The MK1 version plugs to the expansion ROM connector and requires no modification.
Only the person performing the modification can be held responsible in case of trouble.
The original EEPROM from the MK2 and Pico versions can be soldered back onto BCI, so these can still be accessed when no card is inserted. BCI would then automatically switch to the card's algorithms when detected.
You don't need to order backpacks to use with the 2HP interface, the part connecting to the module is hardwired.
All parameters are accessible on all units, and are arranged as follows (this cannot be changed). The MK1 and Pico outputs will be fully wet :
Card MK1 MK2 Pico
Param1 Dry/Wet Param1 Dry/Wet
Param2 Param1 Param2 Param1
Param3 Param2 Param3 Param2