Animal Factory Amplification Coma Reactor Eurorack Delay Module

Animal Factory Amplification Coma Reactor Eurorack Delay Module

In stock

Eurorack delay module

The Coma Reactor boasts the crunchy sounds of the PT2399 chip, but adds a number of useful routing possibilities that really open it up for sound mangling that transcends the norm. Independent volume controls for dry, wet and effects return, allow you to blend in clean, delayed and effected sounds to suit your needs. The only CV input on the module increases or decreases the delay time, going from slight tape-echo warbles to some truly seasick pitch shifting. A buffered clean through allows you to pass an unaffected unity gain to a mixer or other device.

If that wasn't enough - a truly nasty bandpass filter lurks in the delay feedback path as a dirty cocked-wah effect of sorts, and the module is also capable of generating noises and oscillating with no input attached, making it a useful soundtrack generator for the end of the world.

Width: 10 HP (50.8 mm)
Power Consumption: approx. 100 mA +12V, 30 mA -12V
Depth with power cable: approx 46mm

Audio Input: mono 1/8” with input overload protection, 10V p-p
Input Impedance: nom >500kΩ
Audio Output: mono 1/8” with overload protection
Output Impedance: nom. approx 1kΩ

CV (0-10 VDC) Inputs: Time modulation, with attenuverter control

One tested 25cm 16-to-10 pin power cable included.

Copyright © 2023 All Rights Reserved.