Kiwi Technics Juno 106 Hardware Upgrade w/ Software Editor is an expanded synthesis architecture with dual envelopes and multi-waveform LFOs is only the tip of the creative possibilities that any Juno-106 can now possess. Comprehensive routing of controls, high resolution parameters, and eight groups of 64 patches expand the Juno-106's synthesis capability many times over, but we're not done yet. Add in a six voice polyphonic 124 step sequencer and a pattern generator to the mix and Juno-106 becomes a new class of instrument.
Now design and implement a totally modern MIDI implementation suited for modern stage and studios and provide a free Vyzex professional instrument Mac/Windows editor/librarian along with the price of admission and what do you have? Modern Brains and Vintage Brawn, baby. The Kiwi-106!
The Kiwi106 Upgrade features:-
• 512 Patches can be stored and edited. 128 Factory Patches are preloaded.
• Patches are stored in Flash memory so no battery is required.
• Bend Controls (DCO, VCF Bend, LFO Mod Level & Portamento) are stored with the Patch
• MidiCC & Sysex support for all parameters and Midi Sysex support for Patch Dump & Load
• NRPN & Sysex variable parameter control supports 12 bit for 4096 parameter steps
• Patch Editor Control of Parameters (PE firmware v5.2 or higher).
• Key Assign Modes are Poly I&II, Unison Legato & Staccato, Mono Legato & Staccato
• Pedal & Front Panel Button Note Hold modes
• Portamento in Unison, Arp & Chord modes
• DCO Key Assign Detune available in all key modes except mono
• Internal Clock that can be used to clock the Arp, Sequence and/or Pattern and can optionally generate a midi clock. Clock options are Half Note, Quarter Note, 1/8 Note, 1/8 Note Half Swing, 1/8 Note Full Swing, 1/8 Note Triplets, 1/16 Note, 1/16 Note Half Swing, 1/16 Note Full Swing, 1/16 Note Triplets, 1/32 Note, 1/32 Note Triplets, 1/64 Note.
• Two independent envelope generators. Each ENV Mod can select from ENV 1 or 2 and be Inverted or Normal
• Two independent Low Frequency Oscillators with 6 waveforms each. LFO2 random2 wave can be clocked from the Internal clock. Each LFO Mod can select from LFO 1 or 2. LFOs can be plus and minus base note or plus base note only. Each LFO Mod can be inverted.
• Aftertouch, Modulation Level and Dynamics via midi. Dynamics can optionally control the VCA and/or VCF. The Dynamics have been modeled on the Juno-2 with both the VCF & VCA mod turned on by default for a more natural and expressive play. This brings new life to every patch in the Kiwi-106.
• Arp/Seq/Pattern Clocks can optionally display on the KeyT LED and LFO 1 and LFO 2 clocks can optionally display on the Group lights
• Key transpose allows transposition to any key with a range of plus 2 or minus 1 octaves. Sequencer key can be shifted while playing
• Compatible midiCC control set for all Kiwitechnics products
• Can be fitted to HS-60, Juno-106S or Juno-106 models. This needs a slightly longer connection cable and must be specified at the time of the order.
• Comes with metal Label
Swap Back Board
The allows the Roland Juno-106 to be restored to original operation. When the voice board cpu is removed it can be soldered into the swap back board.
for more details see the manual.
Product Overview
Kiwi Technics Juno 106 Hardware Upgrade w/ Software Editor is an expanded synthesis architecture with dual envelopes and multi-waveform LFOs is only the tip of the creative possibilities that any Juno-106 can now possess. Comprehensive routing of controls, high resolution parameters, and eight groups of 64 patches expand the Juno-106's synthesis capability many times over, but we're not done yet. Add in a six voice polyphonic 124 step sequencer and a pattern generator to the mix and Juno-106 becomes a new class of instrument.
Now design and implement a totally modern MIDI implementation suited for modern stage and studios and provide a free Vyzex professional instrument Mac/Windows editor/librarian along with the price of admission and what do you have? Modern Brains and Vintage Brawn, baby. The Kiwi-106!
The Kiwi106 Upgrade features:-
• 512 Patches can be stored and edited. 128 Factory Patches are preloaded.
• Patches are stored in Flash memory so no battery is required.
• Bend Controls (DCO, VCF Bend, LFO Mod Level & Portamento) are stored with the Patch
• MidiCC & Sysex support for all parameters and Midi Sysex support for Patch Dump & Load
• NRPN & Sysex variable parameter control supports 12 bit for 4096 parameter steps
• Patch Editor Control of Parameters (PE firmware v5.2 or higher).
• Key Assign Modes are Poly I&II, Unison Legato & Staccato, Mono Legato & Staccato
• Pedal & Front Panel Button Note Hold modes
• Portamento in Unison, Arp & Chord modes
• DCO Key Assign Detune available in all key modes except mono
• Internal Clock that can be used to clock the Arp, Sequence and/or Pattern and can optionally generate a midi clock. Clock options are Half Note, Quarter Note, 1/8 Note, 1/8 Note Half Swing, 1/8 Note Full Swing, 1/8 Note Triplets, 1/16 Note, 1/16 Note Half Swing, 1/16 Note Full Swing, 1/16 Note Triplets, 1/32 Note, 1/32 Note Triplets, 1/64 Note.
• Two independent envelope generators. Each ENV Mod can select from ENV 1 or 2 and be Inverted or Normal
• Two independent Low Frequency Oscillators with 6 waveforms each. LFO2 random2 wave can be clocked from the Internal clock. Each LFO Mod can select from LFO 1 or 2. LFOs can be plus and minus base note or plus base note only. Each LFO Mod can be inverted.
• Aftertouch, Modulation Level and Dynamics via midi. Dynamics can optionally control the VCA and/or VCF. The Dynamics have been modeled on the Juno-2 with both the VCF & VCA mod turned on by default for a more natural and expressive play. This brings new life to every patch in the Kiwi-106.
• Arp/Seq/Pattern Clocks can optionally display on the KeyT LED and LFO 1 and LFO 2 clocks can optionally display on the Group lights
• Key transpose allows transposition to any key with a range of plus 2 or minus 1 octaves. Sequencer key can be shifted while playing
• Compatible midiCC control set for all Kiwitechnics products
• Can be fitted to HS-60, Juno-106S or Juno-106 models. This needs a slightly longer connection cable and must be specified at the time of the order.
• Comes with metal Label
Swap Back Board
The allows the Roland Juno-106 to be restored to original operation. When the voice board cpu is removed it can be soldered into the swap back board.
for more details see the manual.
