null

Sixty Four Pixels MIDI Relay DC Switcher

Sixty Four Pixels

£54.00
Sorry, this item is out of stock.
In stock.
Adding to cart… The item has been added

This module allows you to switch eight individual outputs using MIDI messages New firmware with enhanced functionality. An eight-relay module is included.

Each relay functions as an isolated SPDT (2-way) switch and can be used to replace a physical switch with a MIDI control (for example to replace a guitar amp channel switch pedal). The relays can also be used for power switching with high current capacity and can be used to drive large solenoids, motors, actuators and so on. Relays can be paired up for multipole switching, increased current capacity, or even making reversing switches for motors.

Each relay is switched when the device receives an appropriate MIDI message from a sequencer / controller / DAW etc.

Each of the eight outputs can be triggered by

  • MIDI notes (NEW with optional velocity range filter),
  • NEW MIDI continuous controller messages (with configurable value range filter)
  • NEW MIDI Program Change messages.

Switching lasts for specified duration and/or length of the trigger condition. The hold time can be modulated by note velocity or by a separate MIDI CC with settings from 10 milliseconds to 16 seconds.

MIDI SWITCHER is configured by MIDI System Exclusive (Sysex) files and a web form is used to configure it. Submitting new settings immediately downloads a Sysex file to be sent to your switcher. Try the web form at http://www.six4pix.uk/switcher/patch.asp
There is a standard 5-pin DIN socket for receiving MIDI data. This is optically isolated in accordance with the MIDI specifications, ensuring your computer / sequencer / controller keyboard is electrically isolated from the board when controlling it.

You will need a 5VDC supply of 500mA capacity to run the Relay-Switcher

The Relay-Switcher controller module comes as a kit and requires assembly by soldering.

The relay board itself is a standard part that I am reselling and is provided fully assembled and tested. The kit also includes a laser cut acrylic base plate to support the connected boards, together with all necessary mounting hardware.

Approx size 155mm x 60mm x 30mm (sockets and feet attached). The approximate weight is 180g

This kit ships with a microcontroller programmed with updated firmware (Version R2) which is shared with the updated MIDI Switcher and adds many new features as well as simpler programming via a web form and sysex files.

Product Overview

This module allows you to switch eight individual outputs using MIDI messages New firmware with enhanced functionality. An eight-relay module is included.

Each relay functions as an isolated SPDT (2-way) switch and can be used to replace a physical switch with a MIDI control (for example to replace a guitar amp channel switch pedal). The relays can also be used for power switching with high current capacity and can be used to drive large solenoids, motors, actuators and so on. Relays can be paired up for multipole switching, increased current capacity, or even making reversing switches for motors.

Each relay is switched when the device receives an appropriate MIDI message from a sequencer / controller / DAW etc.

Each of the eight outputs can be triggered by

  • MIDI notes (NEW with optional velocity range filter),
  • NEW MIDI continuous controller messages (with configurable value range filter)
  • NEW MIDI Program Change messages.

Switching lasts for specified duration and/or length of the trigger condition. The hold time can be modulated by note velocity or by a separate MIDI CC with settings from 10 milliseconds to 16 seconds.

MIDI SWITCHER is configured by MIDI System Exclusive (Sysex) files and a web form is used to configure it. Submitting new settings immediately downloads a Sysex file to be sent to your switcher. Try the web form at http://www.six4pix.uk/switcher/patch.asp
There is a standard 5-pin DIN socket for receiving MIDI data. This is optically isolated in accordance with the MIDI specifications, ensuring your computer / sequencer / controller keyboard is electrically isolated from the board when controlling it.

You will need a 5VDC supply of 500mA capacity to run the Relay-Switcher

The Relay-Switcher controller module comes as a kit and requires assembly by soldering.

The relay board itself is a standard part that I am reselling and is provided fully assembled and tested. The kit also includes a laser cut acrylic base plate to support the connected boards, together with all necessary mounting hardware.

Approx size 155mm x 60mm x 30mm (sockets and feet attached). The approximate weight is 180g

This kit ships with a microcontroller programmed with updated firmware (Version R2) which is shared with the updated MIDI Switcher and adds many new features as well as simpler programming via a web form and sysex files.