null

Beanie Bunnie Moo Moo Eurorack Dual Oscillator Module

Beanie Bunnie

£549.00
Sorry, this item is out of stock.
Loading
Beanie Bunnie Moo Moo Eurorack Dual Oscillator Module main image
Beanie Bunnie Moo Moo Eurorack Dual Oscillator Module main image
Shipping info
Got one of these to sell? We’ll buy it.

We say...

A brilliant take on the complex oscillator concept from the mind of musical polymath Jeanie! Two analogue oscillators with through-zero FM, a built in filtered noise source, CV-controlled octave switching, built-in crossfading mixers... this thing is a real self-patching playground!

Manufacturer's description

The Moo Moo Dual Oscillator features:

  • 2 x Through Zero Analogue Oscillators
  • 1 x Noise Source with dedicated Analogue State Variable Filter
  • 2 x Octave Switches with CV inputs
  • 2 x 2 input mixers with CV control

Each oscillator section features:

  • Sine, Triangle, Saw (down ramp), Pulse and Square wave outputs.
  • A Sync input that can be switched between Hard or Soft Sync via the Filter/Mode switch (Long press).
  • Pulse Width control plus PWM CV input.
  • Through Zero Linear Frequency Modulation Input (normalled to the mixer output of the opposite oscillator).
  • Through Zero Linear Frequency Modulation Amount Control.
  • Through Zero Linear Frequency Offset Amount that changes the timbre of the through zero modulation and also acts as a Coarse Tune control for the pitch.
  • Large Frequency Control knob that extends over 1 octave for better control over fine tuning.
  • Octave select Control and CV Input with a 5 octave range.
  • Noise Level control that injects the filtered noise into the Through Zero FM of the oscillator in parallel with the Through Zero Linear FM input. This can be useful for percussion, drums and glitchy noise sounds as well as random pitch modulation effects.

Noise section

The noise source goes through a state variable filter that has a mode switch to select between High Pass, Band Pass and Low Pass filters. It also features a resonance control, frequency control and frequency CV input. There is an output for the filtered noise so it can be connected to other inputs in the modules such the mixer or PWM inputs or to external modules.

Mixer sections

Each Mixer section is has 2 inputs (A and B) that can be connected to any of the outputs in the oscillator or to external sources. The Mixers also feature CV control (0v to 10V) and a mixer pot to crossfade between the A and B inputs. The outputs of each mixer are inverted which enables 4 quadrant ring modulation to be achieved by inverting a sinewave with one mixer and using the other mixer to crossfade between the non-inverted and inverted sine wave.

  • Width: 24HP
  • Depth: 27mm

How much is my shipping?

Shipping is automatically calculated before you submit your payment information. Simply add items to your cart and proceed to the checkout page, where you'll be offered shipping options and their prices. In the UK, 'next working day' shipping is free if the order value is over £150, and £5 otherwise. We can also ship on a 'next working day before 12pm' service, which costs £6 for orders over £150 and £7.50 for orders under £150.

Shipping to mainland EU typically costs between £7 and £20, depending on the shipping method and the size and weight of the order.

Do you ship to my country?

Almost certainly - the site will give you an estimate of shipping costs if you add an item to the cart and then enter your country and postcode. If you have specific requirements (such as if you prefer UPS over FedEx, for example) then let us know in advance and we'll try to work something out for you.

Shipping methods

We use a combination of DPD, Royal Mail and Parcelforce for the UK, and for international orders it's either DHL, FedEx, UPS, Royal Mail or Parcelforce depending on where you are in the world. If you have a particular preference then try to let us know BEFORE you order so we can look into it for you. Please note that there may occasionally be additional shipping charges if you live in a remote area, depending on what surcharges are applied by the shipper. We'll get in touch to discuss this with you in such cases.

Dispatch times

For UK orders, we aim to dispatch the same working day if we get the order before 16:00. If you have a really urgent situation then of course drop us an email before ordering and we'll always do our absolute best to accommodate you.

For international orders, we normally dispatch the same day if we get the order before 13:00 but again, occasionally it might be the next day before we can send it out, and sometimes the couriers may come to collect a little earlier than scheduled which would also push an order into the next day.

Saturday/Sunday shipping

If you're in the UK and you order before 16:00 on a Friday then we can send something for a Saturday or Sunday delivery with DPD. This is FREE for order values over £350, £5 for order values between £75 and £250, and £7 for order values under £75. (NB: this applies to UK mainland addresses only). Please note that any orders placed after 16:00 on a Friday will ship on the Monday.

International shipping times

Since April 2020, the couriers we use have suspended guarantees for shipping times, so even though we're paying them for priority services - 24-48 hours for most of the world - in practice it's often an extra day on top and sometimes it can be longer. There is absolutely nothing we can do about this, unfortunately. If you are outside the UK and it's a life-or-death situation where you absolutely MUST have that passive mult for the next day then... it may be better to find a local supplier.

Pre-orders

If a product is listed as a pre-order, it means we've ordered it from the supplier but it's not physically in stock yet. The product listing will include an estimated shipping date based on the best information we have from the supplier, but do bear in mind this is subject to change and is not a guaranteed date.

If you place an order containing a mixture of in-stock and pre-order items, we'll normally hold off on shipping anything until the pre-order item(s) have arrived, rather than splitting it into multiple shipments. If you need the in-stock items sooner, we'd recommend placing separate orders. As always, please get in touch if you have questions.

Product Overview

We say...

A brilliant take on the complex oscillator concept from the mind of musical polymath Jeanie! Two analogue oscillators with through-zero FM, a built in filtered noise source, CV-controlled octave switching, built-in crossfading mixers... this thing is a real self-patching playground!

Manufacturer's description

The Moo Moo Dual Oscillator features:

  • 2 x Through Zero Analogue Oscillators
  • 1 x Noise Source with dedicated Analogue State Variable Filter
  • 2 x Octave Switches with CV inputs
  • 2 x 2 input mixers with CV control

Each oscillator section features:

  • Sine, Triangle, Saw (down ramp), Pulse and Square wave outputs.
  • A Sync input that can be switched between Hard or Soft Sync via the Filter/Mode switch (Long press).
  • Pulse Width control plus PWM CV input.
  • Through Zero Linear Frequency Modulation Input (normalled to the mixer output of the opposite oscillator).
  • Through Zero Linear Frequency Modulation Amount Control.
  • Through Zero Linear Frequency Offset Amount that changes the timbre of the through zero modulation and also acts as a Coarse Tune control for the pitch.
  • Large Frequency Control knob that extends over 1 octave for better control over fine tuning.
  • Octave select Control and CV Input with a 5 octave range.
  • Noise Level control that injects the filtered noise into the Through Zero FM of the oscillator in parallel with the Through Zero Linear FM input. This can be useful for percussion, drums and glitchy noise sounds as well as random pitch modulation effects.

Noise section

The noise source goes through a state variable filter that has a mode switch to select between High Pass, Band Pass and Low Pass filters. It also features a resonance control, frequency control and frequency CV input. There is an output for the filtered noise so it can be connected to other inputs in the modules such the mixer or PWM inputs or to external modules.

Mixer sections

Each Mixer section is has 2 inputs (A and B) that can be connected to any of the outputs in the oscillator or to external sources. The Mixers also feature CV control (0v to 10V) and a mixer pot to crossfade between the A and B inputs. The outputs of each mixer are inverted which enables 4 quadrant ring modulation to be achieved by inverting a sinewave with one mixer and using the other mixer to crossfade between the non-inverted and inverted sine wave.

Technical Specs

  • Width: 24HP
  • Depth: 27mm

Shipping Details

How much is my shipping?

Shipping is automatically calculated before you submit your payment information. Simply add items to your cart and proceed to the checkout page, where you'll be offered shipping options and their prices. In the UK, 'next working day' shipping is free if the order value is over £150, and £5 otherwise. We can also ship on a 'next working day before 12pm' service, which costs £6 for orders over £150 and £7.50 for orders under £150.

Shipping to mainland EU typically costs between £7 and £20, depending on the shipping method and the size and weight of the order.

Do you ship to my country?

Almost certainly - the site will give you an estimate of shipping costs if you add an item to the cart and then enter your country and postcode. If you have specific requirements (such as if you prefer UPS over FedEx, for example) then let us know in advance and we'll try to work something out for you.

Shipping methods

We use a combination of DPD, Royal Mail and Parcelforce for the UK, and for international orders it's either DHL, FedEx, UPS, Royal Mail or Parcelforce depending on where you are in the world. If you have a particular preference then try to let us know BEFORE you order so we can look into it for you. Please note that there may occasionally be additional shipping charges if you live in a remote area, depending on what surcharges are applied by the shipper. We'll get in touch to discuss this with you in such cases.

Dispatch times

For UK orders, we aim to dispatch the same working day if we get the order before 16:00. If you have a really urgent situation then of course drop us an email before ordering and we'll always do our absolute best to accommodate you.

For international orders, we normally dispatch the same day if we get the order before 13:00 but again, occasionally it might be the next day before we can send it out, and sometimes the couriers may come to collect a little earlier than scheduled which would also push an order into the next day.

Saturday/Sunday shipping

If you're in the UK and you order before 16:00 on a Friday then we can send something for a Saturday or Sunday delivery with DPD. This is FREE for order values over £350, £5 for order values between £75 and £250, and £7 for order values under £75. (NB: this applies to UK mainland addresses only). Please note that any orders placed after 16:00 on a Friday will ship on the Monday.

International shipping times

Since April 2020, the couriers we use have suspended guarantees for shipping times, so even though we're paying them for priority services - 24-48 hours for most of the world - in practice it's often an extra day on top and sometimes it can be longer. There is absolutely nothing we can do about this, unfortunately. If you are outside the UK and it's a life-or-death situation where you absolutely MUST have that passive mult for the next day then... it may be better to find a local supplier.

Pre-orders

If a product is listed as a pre-order, it means we've ordered it from the supplier but it's not physically in stock yet. The product listing will include an estimated shipping date based on the best information we have from the supplier, but do bear in mind this is subject to change and is not a guaranteed date.

If you place an order containing a mixture of in-stock and pre-order items, we'll normally hold off on shipping anything until the pre-order item(s) have arrived, rather than splitting it into multiple shipments. If you need the in-stock items sooner, we'd recommend placing separate orders. As always, please get in touch if you have questions.

Explore more