The JX-3P Upgrade features:-
• 256 Tones, 8 Sequences & 16 Patterns can be stored and edited, Sequences & Patterns can be optionally linked to tones. It is also possible to temporarily edit any Tone, Seq or Pattern
• MidiCC support for all parameters, Midi Sysex support for Tone Dump & Load
• Patch Editor Control of Parameters (requires PE v 4.1 or later), Tones have 89 editable parameters
• 8 separate 124 max step polyphonic sequences. These can be clocked from the internal/external sequencer clock, Pattern Generator, LFO2 or midi clock divided by 3,4,6,9,12,18,24,36,48,72,96,128,144,168 or 192
• Polyphonic, Unison and Mono Key Assign Modes
• Portamento in Unison, Mono, Arp & Chord modes
• DCO Key Assign Detune available in all key modes, DCO 1 & 2 have separate Tune controls (+-12 semitones)
• Master Synth Fine Tune adjust
• Two independent envelope generators • Two independent Low Frequency Oscillators. LFO2 random2 can be clocked from the sequencer clock. The Arp, Pattern and Sequence clocks can be optionally sourced from the LFO2
• 16 stored Pattern Generator patterns. These can be clocked from the internal/external clock, LFO2 or midi clock divided by 3,4,6,9,12,18,24,36,48,72,96,128,144,168 or 192. The pattern can be any length between 2 and 16 steps
• Pattern Play Mode. This can be faded from no effect to full effect.
• Aftertouch, Modulation Level and dynamics via midi
• Modulation options include Velocity, Aftertouch and midi modulations that can be used in any combination. Each ENV Mod can select from ENV 1 or 2 and is a split control with add (normal) and subtract (inverted)
• LFO Button can inject mod control to any mod destination(s)
• LFOs can be plus or minus base note or plus only
• Bend Lever can be directed to Osc, Filter, LFO Rate and VCA Level in any combination
• Chord Mode. Any chord with up to 6 notes can be set and played from any key
• Enhanced Parameter editing to allow editing of all 89 Tone parameters and 27 Global Parameters from the front panel
• Sequencer, LFO 1 and LFO 2 clocks and voice use can optionally display on the front panel
• Greater speed range and 6 waveforms for LFO1 and LFO2, LFO2 has a second Random mode that can be clocked from the Sequence Clock
• The Arpeggiator can be clocked from the internal/external clock, Pattern Generator, LFO2 or midi clock divided by 3,4,6,9,12,18,24,36,48,72,96,128,144,168 or 192.
• Arp modes are Up, Down, Up and Down and Random, 0, 1 or 2 octaves
• Key transpose allows transposition to any key Up or down up to 2 octaves. Sequencer key can be shifted to any key while playing by using Key Transpose
• Sequencer can be Started, Stopped & Continued using Midi Commands
• Appeggiator will Output Midi Data and Sequencer can optionally Output Midi
• Overall Synth Fine Tune • Chorus has Manual Mode & variable speed
• 256 Tones, 8 Sequences & 16 Patterns can be stored and edited, Sequences & Patterns can be optionally linked to tones. It is also possible to temporarily edit any Tone, Seq or Pattern
• MidiCC support for all parameters, Midi Sysex support for Tone Dump & Load
• Patch Editor Control of Parameters (requires PE v 4.1 or later), Tones have 89 editable parameters
• 8 separate 124 max step polyphonic sequences. These can be clocked from the internal/external sequencer clock, Pattern Generator, LFO2 or midi clock divided by 3,4,6,9,12,18,24,36,48,72,96,128,144,168 or 192
• Polyphonic, Unison and Mono Key Assign Modes
• Portamento in Unison, Mono, Arp & Chord modes
• DCO Key Assign Detune available in all key modes, DCO 1 & 2 have separate Tune controls (+-12 semitones)
• Master Synth Fine Tune adjust
• Two independent envelope generators • Two independent Low Frequency Oscillators. LFO2 random2 can be clocked from the sequencer clock. The Arp, Pattern and Sequence clocks can be optionally sourced from the LFO2
• 16 stored Pattern Generator patterns. These can be clocked from the internal/external clock, LFO2 or midi clock divided by 3,4,6,9,12,18,24,36,48,72,96,128,144,168 or 192. The pattern can be any length between 2 and 16 steps
• Pattern Play Mode. This can be faded from no effect to full effect.
• Aftertouch, Modulation Level and dynamics via midi
• Modulation options include Velocity, Aftertouch and midi modulations that can be used in any combination. Each ENV Mod can select from ENV 1 or 2 and is a split control with add (normal) and subtract (inverted)
• LFO Button can inject mod control to any mod destination(s)
• LFOs can be plus or minus base note or plus only
• Bend Lever can be directed to Osc, Filter, LFO Rate and VCA Level in any combination
• Chord Mode. Any chord with up to 6 notes can be set and played from any key
• Enhanced Parameter editing to allow editing of all 89 Tone parameters and 27 Global Parameters from the front panel
• Sequencer, LFO 1 and LFO 2 clocks and voice use can optionally display on the front panel
• Greater speed range and 6 waveforms for LFO1 and LFO2, LFO2 has a second Random mode that can be clocked from the Sequence Clock
• The Arpeggiator can be clocked from the internal/external clock, Pattern Generator, LFO2 or midi clock divided by 3,4,6,9,12,18,24,36,48,72,96,128,144,168 or 192.
• Arp modes are Up, Down, Up and Down and Random, 0, 1 or 2 octaves
• Key transpose allows transposition to any key Up or down up to 2 octaves. Sequencer key can be shifted to any key while playing by using Key Transpose
• Sequencer can be Started, Stopped & Continued using Midi Commands
• Appeggiator will Output Midi Data and Sequencer can optionally Output Midi
• Overall Synth Fine Tune • Chorus has Manual Mode & variable speed
Product Overview
The JX-3P Upgrade features:-
• 256 Tones, 8 Sequences & 16 Patterns can be stored and edited, Sequences & Patterns can be optionally linked to tones. It is also possible to temporarily edit any Tone, Seq or Pattern
• MidiCC support for all parameters, Midi Sysex support for Tone Dump & Load
• Patch Editor Control of Parameters (requires PE v 4.1 or later), Tones have 89 editable parameters
• 8 separate 124 max step polyphonic sequences. These can be clocked from the internal/external sequencer clock, Pattern Generator, LFO2 or midi clock divided by 3,4,6,9,12,18,24,36,48,72,96,128,144,168 or 192
• Polyphonic, Unison and Mono Key Assign Modes
• Portamento in Unison, Mono, Arp & Chord modes
• DCO Key Assign Detune available in all key modes, DCO 1 & 2 have separate Tune controls (+-12 semitones)
• Master Synth Fine Tune adjust
• Two independent envelope generators • Two independent Low Frequency Oscillators. LFO2 random2 can be clocked from the sequencer clock. The Arp, Pattern and Sequence clocks can be optionally sourced from the LFO2
• 16 stored Pattern Generator patterns. These can be clocked from the internal/external clock, LFO2 or midi clock divided by 3,4,6,9,12,18,24,36,48,72,96,128,144,168 or 192. The pattern can be any length between 2 and 16 steps
• Pattern Play Mode. This can be faded from no effect to full effect.
• Aftertouch, Modulation Level and dynamics via midi
• Modulation options include Velocity, Aftertouch and midi modulations that can be used in any combination. Each ENV Mod can select from ENV 1 or 2 and is a split control with add (normal) and subtract (inverted)
• LFO Button can inject mod control to any mod destination(s)
• LFOs can be plus or minus base note or plus only
• Bend Lever can be directed to Osc, Filter, LFO Rate and VCA Level in any combination
• Chord Mode. Any chord with up to 6 notes can be set and played from any key
• Enhanced Parameter editing to allow editing of all 89 Tone parameters and 27 Global Parameters from the front panel
• Sequencer, LFO 1 and LFO 2 clocks and voice use can optionally display on the front panel
• Greater speed range and 6 waveforms for LFO1 and LFO2, LFO2 has a second Random mode that can be clocked from the Sequence Clock
• The Arpeggiator can be clocked from the internal/external clock, Pattern Generator, LFO2 or midi clock divided by 3,4,6,9,12,18,24,36,48,72,96,128,144,168 or 192.
• Arp modes are Up, Down, Up and Down and Random, 0, 1 or 2 octaves
• Key transpose allows transposition to any key Up or down up to 2 octaves. Sequencer key can be shifted to any key while playing by using Key Transpose
• Sequencer can be Started, Stopped & Continued using Midi Commands
• Appeggiator will Output Midi Data and Sequencer can optionally Output Midi
• Overall Synth Fine Tune • Chorus has Manual Mode & variable speed
• 256 Tones, 8 Sequences & 16 Patterns can be stored and edited, Sequences & Patterns can be optionally linked to tones. It is also possible to temporarily edit any Tone, Seq or Pattern
• MidiCC support for all parameters, Midi Sysex support for Tone Dump & Load
• Patch Editor Control of Parameters (requires PE v 4.1 or later), Tones have 89 editable parameters
• 8 separate 124 max step polyphonic sequences. These can be clocked from the internal/external sequencer clock, Pattern Generator, LFO2 or midi clock divided by 3,4,6,9,12,18,24,36,48,72,96,128,144,168 or 192
• Polyphonic, Unison and Mono Key Assign Modes
• Portamento in Unison, Mono, Arp & Chord modes
• DCO Key Assign Detune available in all key modes, DCO 1 & 2 have separate Tune controls (+-12 semitones)
• Master Synth Fine Tune adjust
• Two independent envelope generators • Two independent Low Frequency Oscillators. LFO2 random2 can be clocked from the sequencer clock. The Arp, Pattern and Sequence clocks can be optionally sourced from the LFO2
• 16 stored Pattern Generator patterns. These can be clocked from the internal/external clock, LFO2 or midi clock divided by 3,4,6,9,12,18,24,36,48,72,96,128,144,168 or 192. The pattern can be any length between 2 and 16 steps
• Pattern Play Mode. This can be faded from no effect to full effect.
• Aftertouch, Modulation Level and dynamics via midi
• Modulation options include Velocity, Aftertouch and midi modulations that can be used in any combination. Each ENV Mod can select from ENV 1 or 2 and is a split control with add (normal) and subtract (inverted)
• LFO Button can inject mod control to any mod destination(s)
• LFOs can be plus or minus base note or plus only
• Bend Lever can be directed to Osc, Filter, LFO Rate and VCA Level in any combination
• Chord Mode. Any chord with up to 6 notes can be set and played from any key
• Enhanced Parameter editing to allow editing of all 89 Tone parameters and 27 Global Parameters from the front panel
• Sequencer, LFO 1 and LFO 2 clocks and voice use can optionally display on the front panel
• Greater speed range and 6 waveforms for LFO1 and LFO2, LFO2 has a second Random mode that can be clocked from the Sequence Clock
• The Arpeggiator can be clocked from the internal/external clock, Pattern Generator, LFO2 or midi clock divided by 3,4,6,9,12,18,24,36,48,72,96,128,144,168 or 192.
• Arp modes are Up, Down, Up and Down and Random, 0, 1 or 2 octaves
• Key transpose allows transposition to any key Up or down up to 2 octaves. Sequencer key can be shifted to any key while playing by using Key Transpose
• Sequencer can be Started, Stopped & Continued using Midi Commands
• Appeggiator will Output Midi Data and Sequencer can optionally Output Midi
• Overall Synth Fine Tune • Chorus has Manual Mode & variable speed
